top of page
All Michigan Mitigation logo – radon testing and mitigation

Radon Levels in Michigan: Which Areas Have the Highest Risk?

Writer: All Michigan Mitigation
All Michigan Mitigation
4d
8 min read

Aerial view of Michigan homes illustrating radon levels in Michigan and regional radon risk

Michigan landlords occupy a position in the radon conversation that is distinct from both homeowners and commercial property managers. They own residential property. They have tenants living in it. They carry legal obligations related to the habitability of that property. And in a state with no mandatory radon testing requirements for rental housing, they are navigating a health risk that affects their tenants directly without any regulatory framework telling them what they need to do about it.


This post focuses on the practical testing dimension of rental property radon management — how testing works in a rental context, what protocols apply to single-unit and multi-unit properties, and how landlords can integrate testing into their property management practice in a way that is both professionally responsible and operationally manageable. The liability dimension of rental property radon was covered comprehensively in our post on apartment buildings and radon. The investor due diligence perspective was addressed in our post on radon due diligence for property investors. This post owns the practical testing process for landlords — the specific how-to that those earlier posts referenced without covering in depth.


Why Rental Property Testing Differs From Owner-Occupied Testing


Testing a rental property for radon involves the same fundamental process as testing an owner-occupied home — a certified professional deploys a test device in the lowest livable level of the property under closed-house conditions for the required test period, retrieves the device, and submits it to an accredited laboratory for analysis. The physics, the protocols, and the result interpretation are identical.


What differs is the operational context surrounding that process. In an owner-occupied home, the homeowner controls the property entirely — they can schedule testing at will, maintain closed-house conditions without coordinating with anyone else, and act on results immediately and independently. In a rental property, a tenant is living in the space. Testing requires tenant notification and cooperation. Closed-house conditions require tenant awareness and participation. Results may need to be communicated to tenants. And any mitigation that follows an elevated result involves coordinating access and work in a space where someone is living.


These operational differences require landlords to approach rental property testing with more advance planning and communication than owner-occupied testing requires — not dramatically more, but enough that having a clear process in place before the testing conversation begins with a tenant produces better outcomes than improvising as the situation develops.


Tenant Notification: The Starting Point


The first step in any rental property radon test is notifying the tenant. This is not just a courtesy — it is a practical necessity, because tenant cooperation during the test period directly affects result validity. Closed-house conditions require the tenant to keep windows and exterior doors closed throughout the test period. A tenant who does not know a test is happening and opens windows normally during warm weather invalidates the test without intending to.


Tenant notification should be clear, informative, and non-alarming. The communication should explain what radon is and why testing is being conducted — that it is a routine health and safety assessment, not a response to a specific known problem. It should describe what the tenant needs to do during the test period — primarily maintaining closed-house conditions and not disturbing the test device. And it should indicate how long the test will run and when the landlord will retrieve the device.


Framing the notification positively — as a proactive step the landlord is taking to ensure the health and safety of the rental unit — is both accurate and constructive. Tenants who understand that the landlord is taking their health seriously generally cooperate readily with the modest requirements of the test period.


Written notification is preferable to verbal for documentation purposes. A brief written notice — delivered by email, text, or physical note depending on how the landlord normally communicates with tenants — creates a record that the tenant was informed and that the test was conducted transparently. In a world where radon liability in rental housing is an evolving area of law, documentation of transparent, professionally conducted testing is a landlord's best evidence of responsible property management.


Scheduling and Access


Coordinating test device placement and retrieval with an occupied rental unit requires scheduling that respects the tenant's time and access needs while meeting the professional requirements of the test. For most rental properties this is a straightforward logistical matter — the certified professional needs brief access to the unit at the start of the test to place the device and again at the end of the test to retrieve it, with the test running passively in between.


Standard access notice requirements under Michigan landlord-tenant law — typically 24 hours advance notice for non-emergency entry — apply to radon testing access as they do to any other landlord entry. Planning the test schedule to accommodate this notice requirement and coordinating convenient access times with the tenant produces a smoother process than attempting to conduct testing on an emergency or unannounced basis.


The test device itself is small and unobtrusive — a charcoal canister or electret device placed on a table, shelf, or other elevated surface in the lowest livable area of the unit. It does not require any modification to the unit, does not generate noise or disruption, and does not require any ongoing attention from the tenant during the test period beyond maintaining closed-house conditions. Most tenants who have been properly informed find the process entirely manageable.


Single-Unit Rental Properties


For single-unit rental properties — a rented single-family home, a duplex unit, a standalone cottage — the testing protocol mirrors the standard residential approach. One test device placed in the lowest livable level of the unit under proper closed-house conditions for a minimum 48-hour test period produces a result that characterizes the unit's radon profile for the purpose of the landlord's assessment.


The post-result process for a single-unit rental depends on what the test shows. A result below 2 pCi/L provides reassurance and a retesting interval of two years. A result between 2 and 4 pCi/L warrants a conversation with a certified radon professional about whether mitigation is appropriate given the specific characteristics of the property and the tenancy. A result at or above 4 pCi/L indicates that mitigation is recommended — and that the tenant should be informed of the result promptly and told what steps are being taken to address it.


Multi-Unit Properties: Testing Protocol


For multi-unit properties, the testing approach expands to cover the units with the most direct foundation contact — ground-floor and basement units — following the protocol we covered in our post on apartment buildings and radon. Each ground-floor and basement unit in a multi-unit building should be tested individually rather than relying on a single representative sample, because radon levels can vary significantly from unit to unit within the same building due to local variation in sub-slab conditions, foundation characteristics, and unit-specific construction details.


The coordination requirements for multi-unit testing are proportionally greater than for single-unit testing — multiple tenants need to be notified, multiple access appointments need to be scheduled, and multiple test devices need to be placed and retrieved. For a property manager overseeing a building with several ground-floor units, coordinating all of this in a single testing campaign — placing all devices on the same day and retrieving them together after the test period — is more efficient than staggering tests across multiple separate visits.


For larger multi-unit properties, working with a certified radon professional who has experience in multi-unit testing is particularly important. The specific protocol for how many units to test, where to place devices within each unit, and how to interpret results across a building requires professional judgment that goes beyond standard single-unit residential testing protocols.


Communicating Results to Tenants


Whether and how to communicate radon test results to tenants is a question that Michigan landlords currently navigate without specific legal guidance — Michigan has no mandatory tenant notification requirement for radon test results, unlike Illinois, which updated its Tenant Radon Protection Act in 2024 to create specific disclosure obligations.


The ethical position on this question is straightforward regardless of the legal requirement: tenants who are living in a unit where elevated radon has been documented have a right to know. Withholding that information from people who are being exposed to a health risk in a space they are paying to occupy is not a defensible position, and as we covered in the landlord liability post, it is precisely the kind of known-defect concealment that creates significant legal exposure for landlords.


Best practice is to communicate test results to tenants promptly and transparently — sharing the actual result, explaining what it means relative to the EPA action level, and describing what steps are being taken in response. For results below the action level, a brief communication confirming the test result and the retesting schedule is appropriate. For results at or above the action level, communication should include the mitigation plan — when it will be scheduled, what the process involves, and what the expected outcome is — so tenants understand that the identified problem is being addressed on a defined timeline.


Building Testing Into the Tenancy Lifecycle


The most operationally effective approach for Michigan landlords is to build radon testing into the standard tenancy lifecycle rather than treating it as a separate, ad hoc activity. Several natural integration points make this straightforward.


Initial testing at unit turnover — when one tenancy ends and before a new one begins — is logistically ideal because the unit is vacant, closed-house conditions are easy to maintain without tenant coordination, and there is no time pressure from an occupying tenant's schedule. Testing during vacancy also means results are available before the new tenant moves in, allowing any elevated findings to be addressed before occupancy rather than requiring mitigation in an occupied unit.


Periodic retesting at the standard two-year interval — aligned with other unit inspection and maintenance activities that landlords already conduct — keeps the radon knowledge base current without creating a separate administrative burden. Building the retest reminder into the same calendar system used for annual HVAC servicing, smoke detector checks, and other periodic maintenance makes it a routine item rather than an easily forgotten consideration.


For landlords with mitigation systems already installed in one or more units, the two-year retest is particularly important — confirming that systems are performing at their installed baseline rather than assuming continued performance without verification, as we covered in our post on how often to test.


The Documentation Habit


Every rental property radon test — initial and periodic — should be documented in the property file maintained for each unit. The documentation should include the test date, the certified professional who conducted the test, the laboratory result, and any mitigation actions taken in response. This documentation record is the landlord's evidence of responsible, systematic radon management — evidence that is invaluable if a tenant health question arises, if the property is sold, or if any legal question about radon exposure in the unit is ever raised.


The documentation habit costs nothing beyond the discipline of maintaining records that any professionally managed rental property should have anyway. It converts radon testing from an informal activity into a documented component of the property management record — exactly the kind of systematic, defensible practice that distinguishes professional property management from casual landlording.


At All Michigan Mitigation, we work with Michigan landlords and property managers throughout West Michigan, providing certified radon testing for single-unit and multi-unit rental properties with the professional documentation and tenant communication support that rental property testing requires. Radon is the only thing we do, and we understand the specific operational context that rental property testing involves.


Visit us at allmichiganmitigation.com to schedule rental property testing or to discuss what a systematic radon management program would look like for your rental portfolio.



All Michigan Mitigation is a West Michigan radon testing and mitigation company dedicated exclusively to helping homeowners understand and eliminate radon risk in their homes.




Comments


bottom of page